Katalog kování SK 2021

www.demos ‑trade.com LIBRA H1 PAT. PENDING LIBRA is the innovative family of CABINET HANGERS and WALL PLATES especially conceived to satisfy all the customer's needs. The LIBRA hangers are to be installed behind the rear panel with the only small cover caps left visible inside the cabinet. LIBRA is a very resistant and reliable solution as the zinc-coated steel body is sensibly thicker, and therefore stronger. Al l the model s wi thin the L IBRA fami l y feature an innovat i ve ANTI-TURNOVER device which is covered by patent. LIBRA H1 is the universal screw fixing cabinet hanger. Also featured in the LIBRA family are 5 types of wall plates and 1 t ypes o f wa l l bar s made o f ve r y t h i ck z i nc - coa t ed s t ee l and hardened by punched impressions. Wall bars and wall plates feature oval holes which facilitate the cor rec t pos i t i on i ng and g i ve t he pos s i b i l i t y to car r y ou t t he horizontal adjustment. Placement of the holes for wal l-fixat ion has been opt imised to reduce the stress on the plates and on the plugs. LIBRA cabinet hangers allow to adjust the cabinet vertically and horizontally. The 2 movements are 100% INDEPENDENT of each other and therefore make the adjustments much easier and more efficient. The adjustment and the locking of the ANTI-TURNOVER bolt can be carried out from the inside of the cabinet by using a standard PZ2 screwdriver. Capaci t y Loading 75 Ki los per piece in accordance wi th the regulation DIN 68840 Steel, Zinc al loy and Engineering plast ic according to related version. Part. no 63420010ZN Description Cabinet hanger Libra H1 For wall plates and cover caps see the related pages. 12 18,5 15 min. 31 42 DRILLING PLAN FOR CABINET HANGER FIXED UNDER THE CABINET TOP OTHER APPLICATIONS FOR CABINET HANGER NOT FIXED TO THE TOP recommended fixing screws Ø3,5x20 recommended fixing screws Ø3,5x20 recommended fixing screws Ø3,5x20 16-21 Drilling plan for Libra CC1 cover cap Drilling plan for Libra CC2 cover cap 40 24,5 Ø30 18,5 15 min. 1 Ø30 40 24,5 2 15 min. 18,5 1 2 3 Ø30 40 24,5 2 15 min. 18,5 Ø30 40 24,5 15 min. 18,5 Ø30 40 24,5 15 min. 18,5 12 18,5 15 min. 54,5 42,5 25 31 16 4,4 3,2 56,5 12 18,5 15 min. 54,5 42,5 25 31 16 4,4 3,2 56,5 361269 rektifikačné závesy skryté Z Á V E S Y A V Ý K L O P Y 1.67 • zaisťovacia skrutka proti vysadeniu skrinky zo závesného profilu podľa normy EN14749 • nosnosť 150 kg/pár • nastavenie výšky 13 mm, hĺbky 12 mm • pre hĺbku korpusu do 350 mm (horné skrinky) • pre zavesenie na stenu je možné použiť aj lištu 352537 Súprava obsahuje: – pár závesného kovania a krytiek – montážnu šablónu – závesný plech – skrutky do korpusu 1 – nastavenie na výšku 2 – nastavenie odsadenia od steny 3 – poistka proti vysadeniu vŕtanie otvorov pre nastavenia Osadenie kovania odporúčané upevňova- cie skrutky ø 3,5 × 20 16 – 21 odsadenia chrbta Ĺ závesy na str. 1.39 – 1.52, výklopy na str. 1.92 – 1.114 Ĺ skrutky a euroskrutky na str. 7.3 – 7.18 Závesné kovanie Libra H1 so zaistením kód popis súprava na jednu skrinku (vrátane šablóny) OBSAH