Fittings catalogue 2021

1 12345 12345 LIBRA H2 Part. no PAT. PENDING LIBRA is the innovative family of CABINET HANGERS and WALL PLATES especially conceived to satisfy all the customer's needs. The LIBRA hangers are to be installed behind the rear panel with the only small cover caps left visible inside the cabinet. LIBRA is a very resistant and reliable solution as the zinc-coated steel body is sensibly thicker, and therefore stronger. Al l the mode l s wi th i n the L IBRA fami l y feature an i nnovat i ve ANTI-TURNOVER device which is covered by patent. LIBRA H2 is the universal cabinet hanger 3 dowels + rotary lever. Also featured in the LIBRA family are 5 types of wall plates and 1 t ype s o f wa l l ba r s made o f ve r y t h i ck z i nc - coa t ed s t ee l and hardened by punched impressions. Wall bars and wall plates feature oval holes which facilitate the correct positioning and give the possibility to carry out the horizontal adjustment. Placement of the holes for wal l-f ixat ion has been opt imised to reduce the stress on the plates and on the plugs. LIBRA cabinet hangers allow to adjust the cabinet vertically and horizontally. The 2 movements are 100% INDEPENDENT of each other and therefore make the adjustments much easier and more efficient. The adjustment and the locking of the ANTI-TURNOVER bolt can be carried out from the inside of the cabinet by using a standard PZ2 screwdriver. Capaci t y Loading 75 Ki los per piece in accordance wi th the regulation DIN 68840 Steel , Zinc al loy and Engineer ing plast ic according to related version. 63420020ZN Description Cabinet hanger Libra H2 4 holes Ø10 5 13 12 37 32 32 32 19,5 15 min. 40 42 DRILLING PLAN FOR CABINET HANGER FIXED UNDER THE CABINET TOP OTHER APPLICATIONS FOR CABINET HANGER NOT FIXED TO THE TOP recommended fixing screws Ø3,5x20 recommended fixing screws Ø3,5x20 recommended fixing screws Ø3,5x20 16-21 13 37 32 32 32 19,5 15 min. 49 24,5 Ø30 Drilling plan for Libra CC1 cover cap Drilling plan for Libra CC2 cover cap For wall plates and cover caps see the related pages. 4,4 36,5 56,5 3,3 2 4 × Ø10 37 32 32 32 5 15 min. 13 19,5 Ø30 49 24,5 1 2 3 2 4 × Ø10 37 32 32 32 5 15 min. 13 19,5 Ø30 49 24,5 1 2 3 2 4 × Ø10 37 32 32 32 5 15 min. 13 19,5 Ø30 49 24,5 1 2 3 13 12 19,5 15 min. 54,5 42,5 34 40 12 18,5 15 min. 54,5 42,5 25 31 16 4,4 3,2 56,5 134959 134963 160564 227087 2 37 32 32 32 15 min. 13 19,5 Ø30 49 24,5 H I N G E S A N D L I F T F I T T I N G S concealed adjustable cabinet hangers 1.68 Item in stock Item on demand Ĺ for hinges see p. 1.39–1.52, for lift fittings see p. 1.92–1.114 Ĺ for screws and euro screws see p. 7.3–7.18 • locking bolt against unhinging of the cabinet in accordance with the standard EN14749 • load capacity 150 kg/pair • the back should be inserted 16mm from the back edge of the cabinet body • height adjustment 13 mm, depth adjustment 12 mm • for cabinet body depth up to 350 mm (top cabinets) 1] for drilling 30mm 1 – height adjustment 2 – adjustment of offset from the wall 3 – safety latch against springing up Drilling plan for fixing option Installation of the cabinet hangers recommended fastening screws ø 3.5 × 20 16–21 offset of the back panel code description right-left, screw mounting Cover caps code type colour wide white grey narrow nickel Libra H2 cabinet hangers with locking Ĺ recommended wall plate 352537, or 134964 or 134965, p. 1.71 CONTENTS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15