Fittings catalogue 2021

5 5.94 12345 12345 351707 351706 DT157 2250 11,5 A 9 10,5 11,5 5 5 ø35 1 2 1 2 a b F I T T I N G S F O R S L I D I N G A N D F O L D I N G D O O R S door straighteners Item in stock Item on demand Ĺ Optimum weights for each type of panel can be found on page 5.3. Door straightener Sliding doors straightener • panel: min. 18 mm • maximum pitch: 2,250 mm • one piece is sufficient for width of up to 750 mm, 2 pcs for wider leaves • in case of excessively wide leaves, it is advisable to use straighteners also in the horizontal direction • prevents the bending of sliding doors with bottom guide; we recommend to use it for all doors with above-standard height or width or for doors with a glued mirror, etc. • solution with threaded bars allows shortening to any pitch • 4 fasteners are included in the set for better fixation of the bar in the cut-out Use • if the doors are in the position 1 , screw the nut “P” clockwise a , or for the door position 2 screw in the opposite direction (direction b ) Installation After milling the grooves and cups deepening, cut threaded bars and cover caps for threaded bars. Slide cover caps on threaded bars and insert into grooves. The central cover cap has a dilatation area 5 mm on each side. Secure cover caps with attached fasteners. Instructions available for download on the portal. • high-quality straightener preventing tall door leaves from bending • metal cups, high strength, plastic cover of draw bars • one piece is sufficient for width of up to 750 mm, 2 pcs for wider leaves • can be cut by up to 210 mm on each side code hinge pitch A (mm) 2,248 code colour white black Door straightener 2,250 mm CONTENTS 1 2 3 4 6 7 8 9 10 11 12 13 14 15