Fittings catalogue 2021

2 12345 12345 2.60 1 389310 Z95.4100 389311 Z95.4600 389312 Z95Q1040A 389313 Z95D4100 1a 1b 1c 1d 1e 1f 1g 1h 1] KB LW 1 3 2 D R A W E R S L I D E S A N D D R A W E R A C C E S S O R I E S Space Step Item in stock Item on demand 1] The approval of the actual load capacity of the furniture made by you with Space Step must be provided by you as a manufacturer in compliance with the EN − 14183 standard. This fact must be stated on the manufacturer's label. Cutting: LW – 130 mm We recommend: KB 1,200 mm, use 2 pieces to prevent excessive deformation • optional • for mounting pull-out runners, suitable for all Blum’s Box systems and runner systems Recommended material: For the plinth step, we recommend a coated plywood (3 layers) with a minimum thickness of at least 21 mm. Step surface recommendations: The surface of the step must be non-slip. For this purpose, it is possible to use a non-slip mat directly affixed to the surface of the step, or a non-slip plate. Attaching the labels: The EN − 14183 standard assumes the positioning of both attached labels to be visible. Slide under Space Step: n Only 30 kg or 40 kg slides may be used. The dynamic carrying capacity for the pull-out under Space Step is 20 kg. code Blum code description Space Step set 410 mm, Orion grey Space Step set 460 mm, Orion grey code Blum code description 2 Horizontal profile for the Space Step set code Blum code description 3 spacer strips for the Space Step set Space Step set Horizontal profile Spacer strip description 2 × TANDEM 561Hxxx1B95 left/right 2 × vertical support 2 × corner connector 2 × support feet 2 × slide-on rear panel bracket for the shelf slide 1 × front connector (magnet and catch plate) 4 × distance bumper 1 ] 2 × sticker (safety instructions and manufacturer's certificate) 14 × flat headed screws 4 × 15 mm 1 × assembly instructions from KB > 900 mm, 4 pcs cabinet body width internal width of the cabinet body CONTENTS 1 3 4 5 6 7 8 9 10 11 12 13 14 15