Fittings catalogue 2021

1.153 www.demos ‑trade.com 52 11,3 C 5,5 ø35 107616 1078660 14.5 19.0 6.0 107617 1078661 5 28.5 15.5 107619 1078662 –1.5 35.0 22.0 3 4 4.5 5 6 14 0.1 0.1 0.1 0.1 0.1 15 0.2 0.2 0.2 0.2 0.2 16 0.4 0.4 0.4 0.4 0.3 17 0.6 0.5 0.5 0.5 0.5 18 0.8 0.8 0.7 0.7 0.7 19 1.1 1.0 1.0 1.0 1.0 20 1.5 1.4 1.3 1.3 1.3 21 2.2 1.9 1.8 1.7 1.6 22 3.0 2.6 2.4 2.3 2.1 23 3.9 3.4 3.2 3.0 2.7 24 4.7 4.2 4.0 3.8 3.4 25 5.6 5.1 4.8 4.6 4.2 C 3 4 4.5 5 6 A D 1] 10 7.5 8.5 9.0 9.5 10.5 11 6.5 7.5 8.0 8.5 9.5 12 5.5 6.5 7.0 7.5 8.5 13 4.5 5.5 6.0 6.5 7.5 14 3.5 4.5 5.0 5.5 6.5 15 2.5 3.5 4.0 4.5 5.5 16 1.5 2.5 3.0 3.5 4.5 17 0.5 1.5 2.0 2.5 3.5 18 0.5 1.0 1.5 2.5 19 0.0 0.5 1.5 20 0.5 C 3 4 4.5 5 6 A D 1] 0 8.0 9.0 9.5 10.0 11.0 1 7.0 8.0 8.5 9.0 10.0 2 6.0 7.0 7.5 8.0 9.0 3 5.0 6.0 6.5 7.0 8.0 4 4.0 5.0 5.5 6.0 7.0 5 3.0 4.0 4.5 5.0 6.0 6 2.0 3.0 3.5 4.0 5.0 7 1.0 2.0 2.5 3.0 4.0 8 0.0 1.0 1.5 2.0 3.0 9 0.0 0.5 1.0 2.0 10 0.0 1.0 11 0.0 C 3 4 4.5 5 6 F D 1] 14 1.6 2.6 3.1 3.6 4.6 15 1.7 2.7 3.2 3.7 4.7 16 1.9 2.9 3.4 3.9 4.8 17 2.1 3.0 3.5 4.0 5.0 18 2.3 3.3 3.7 4.2 5.2 19 2.6 3.5 4.0 4.5 5.5 20 3.0 3.9 4.3 4.8 5.8 21 3.7 4.4 4.8 5.2 6.1 22 4.5 5.1 5.4 5.8 6.6 23 5.4 5.9 6.2 6.5 7.2 24 6.2 6.7 7.0 7.3 7.9 25 7.1 7.6 7.8 8.1 8.7 Slide-on hinges for sliding on a plate H I N G E S A N D L I F T F I T T I N G S • 95° opening angle • mounting on the plate by sliding-on • drilling diameter for a 35 mm cup, drilling pitch for mounting screws/dowels 52 mm • integrated adjustment of overlay + 0.5 / − 2.5 mm • integrated depth adjustment ± 2 mm • height adjustment with a mounting plate • cup and arm nickel-plated steel Ĺ for mounting plates, cover caps and other accessories, see p. 1.154 Type of cup cup T 42 for screwing-on hinge height H, door protru- sion T at distance 0 mm and cup distance C 3 mm example of use side of the door Slide-on For door thickness 14–25 mm Minimum gap (F) between individual doors door thick- ness (mm) cup distance (C) 1] Select the nearest plate size, see p. 1.154 from the catalogue, e.g.: table 3.5 = plate 3, table 6.5 = plate 5, etc. Table for plate height determination (D) when the overlay size or thickness of the door and the drilling distance of the hole for the cup from the door's edge are known For door thickness 14–25 mm D = height of the plate C = cup distance A = overlay (mm) D = height of the plate C = cup distance A = overlay (mm) D = height of the plate C = cup distance F = door thickness (mm) Full overlay (D = C + B − A) Half overlay (D = C + B − A) Inset (D = C + B + F) Silent System code Hettich code description B (mm) H (mm) T (mm) full overlay half overlay inset distance D distance D distance D base B base B base B cup distance C cup distance C cup distance C side of the side of the side of the door door door door overlay A overlay A gap F gap F 2 × gap F CONTENTS