Fittings catalogue 2021

10.40 12345 12345 10 405196 342513 43 10 F U R N I T U R E L I G H T S Item in stock Item on demand Switches for 230 V Ĺ Observe necessary work rules for sensitive electronics, for detailed information see p. 10.5. • shorten the spring as needed to touch the profile cover • in case of a too long spring, a short circuit can occur and thus cause malfunctions or damage to the switch • excessively shortened spring can be carefully extended – avoid pulling out, risk of damage, careful handling is needed • especially in case of switching of higher power, the switch must be closely fitted to the aluminium profile so that the heat can dissipate • we recommend taping with a double-sided adhesive tape 3M • lit diode cannot be turned off • motion sensor for profile which switches the light on when detecting a movement in the dark (sensor is inactive in daylight) at the detection distance (2 m – in a straight line) • sensitivity adjustable in the range of 2–60 lx • the lighting is switched on for 40 seconds (if the sensor does not detect movement after this time, the lighting switches off). • the light switches on/off by touching the lit point • intensity of lighting can be set by a longer touch • memory function – remembers the intensity at the moment of the switch-off and uses the same intensity when it is switched on Profile motion sensor (for soldering) Touch switch/dimmer for aluminium profiles Technical parameters: Voltage: 12 V / 24 V Dimensions: 10 × 57 mm, 10.5 mm hole for sensor in the cover Maximum current: 8 A Maximum switching power: 96 W (12 V), 192 W (24 V) Technical parameters: Voltage: 12 V / 24 V Dimensions: 10 × 43 mm Regulation range: 0–100% Maximum current: 8 A Maximum switching power: 96 W / (12 V), 192 W / (24 V) code description motion sensor for profile code description switch/dimmer for aluminium profiles CONTENTS 1 2 3 4 5 6 7 8 9 11 12 13 14 15