Fittings catalogue 2021

10.38 12345 12345 10 215666 215772 392223 312315 312316 25 10 F U R N I T U R E L I G H T S Item in stock Item on demand switches for aluminium profiles Ĺ Observe necessary work rules for sensitive electronics, for detailed information see p. 10.5. Technical parameters: Voltage: 12 V / 24 V Dimensions: 10 × 25 mm Regulation range: 0–100% Max. current: 7.5 A Maximum switching power: 90W (12 V), 180W (24 V) Standby mode consumption: 0.1 W / (12 V), 0.282 W / (24 V) • capacitive sensor – touching any part of the profile will switch the light on/off • intensity of lighting can be set by a longer touch • memory function – remembers the intensity at the moment of the switch-off and uses the same intensity when it is switched on Touch switch/dimmer for aluminium profiles • dimmer/switch for installation into an aluminium profile with an optical proximity sensor and control LED diode (yellow/blue) • memory function – remembers the intensity at the moment of the switch-off and uses the same intensity when it is switched on • multi-switch has three modes: – touch-free switch – door switch – twilight switch • easy installation by soldering to a LED strip; power supply is soldered from the other end • necessary to screw to the aluminium profile with a stainless steel screw (2 mm hole) • maximum length of the control profile is 3 m, other profiles must be insulated to avoid interference with sensor function • does not work when supplied by battery and earthed power sources • does not work on lacquered profiles (white and other) • aluminium profile must not be earthed, contact with wall may cause malfunction, must be tested in place • we recommend taping the switch with an insulating tape • slightly bend the end of the LED strip away from the aluminium profile or also tape with the insulating tape • installation instructions included, detailed instructions and installation video can be found on www.demos24plus.com Technical parameters: Voltage: 12 V DC / 24 V DC Dimensions: 10 × 25 mm Regulation range: 0–100% Maximum current: 7.5 A Maximum switching power: 90W (12 V), 180W (24 V) Standby mode consumption: 0.09 W / (12 V), 0.18 W / (24 V) code LED indicators yellow LED blue LED without LED indicator code colour yellow LED blue LED Multi-switch/dimmer for aluminium profiles 3 in 1 CONTENTS 1 2 3 4 5 6 7 8 9 0 11 12 13 14 15