Fittings catalogue 2021

10.26 12345 12345 10 18 W, 1.5 A 88 × 39 × 28 405179 30 W / 2.5 A 85 × 50 × 32 405180 48 W / 4.0 A 116 × 52 × 33 405181 80 W 6.6 A 116 × 56 × 34 405182 120W, 10 A 172 × 73 × 43 353250 15 W, 1.25 A 160 × 30 × 16 405183 30 W / 2.5 A 160 × 58 × 18 405184 60 W / 5 A 184 × 64 × 22 405185 75 W / 6.25 A 170 × 57 × 32 405186 100 W / 8.33 A 180 × 66 × 32 405187 405178 L H 1000 D 1000 220- 240 V 220- 240 V 220- 240 V 3 F U R N I T U R E L I G H T S Item in stock Item on demand 12 V transformers Ĺ Observe necessary work rules for sensitive electronics, for detailed information see p. 10.5. • for power supply of LED strips and lights with 12 V voltage, direct current • power supply: 220–240 V, 50 Hz 12 V transformers 12 V transformers • for power supply of LED strips and lights with 12 V voltage, direct current, grey edges (12 V) • power supply: 220–240 V, 50 Hz • plug-in version with grey connector socket (12 V) • for power supply of LED strips and lights, supply voltage: 12 V, direct current power L × D × H (mm) code power L × D × H (mm) code power L × D × H (mm) code 6 W, 0.5 A 58 × 26 × 35 • round connector with grey socket (12 V) at the output • in order to achieve optimal function, it is recommended to have the transformer as close to the light source as possible (Longer cables cause voltage losses and a subsequent drop in luminous intensity. They may also have disturbing influence on nearby electrical appliances.) • the transformer should have a minimum distance of 0.5 m from other electrical appliances • transformers must be located in such a way that sufficient ventilation – heat dissipation – is provided; if located in a closed room, sufficient ventilation (ventilation holes) must be provided • power of the transformer must be higher than the input power of the lights, recommended reserve is 20%, for continuous lighting the reserve should be increased to 30% • circular connector at output • in order to achieve optimal function, it is recommended to have the transformer as close to the light source as possible (Longer cables cause voltage losses and a subsequent drop in luminous intensity. They may also have disturbing influence on nearby electrical appliances.) • the transformer should have a minimum distance of 0.5 m from other electrical appliances • transformers must be located in such a way that sufficient ventilation – heat dissipation – is provided; if located in a closed room, sufficient ventilation (ventilation holes) must be provided 12 V flat transformers Warning It is not possible to combine 12 V LED strips with the 24 V transformer and vice versa. The transformer must always have sufficient reserve for the respective LED strip set. During normal use, the reserve should be 20%, if used for more than 5 hours, we recommend increasing the reserve to 30% or more. Offered transformers have protection to prevent damage, the transformer switches off at overloading and after reducing the load and cooling, the transformer is functional again. However, overloading has a negative impact on the overall service life. The transformer should be installed so that it can be accessed and possibly replaced at any time and it should be well ventilated. Installation in small, unventilated space reduces its service life. Please note that the supply voltage must comply with ČSN EN 60038, damage due to over-voltage in the electrical network is not a reason for placing a complaint. Complaints are solved by replacing the faulty transformer. Other costs related to replacing the connection are not recognised. Transformer power (W) = x + 20% (30%) x = LED strip length (m) × LED strip power input (W/m) Example: when using a strip with 14.4W/m and length of 2.5 m, the power of the strip is 36W + 20% reserve (7.2 W) = 43.2 W. You will thus need a trans- former with more than 44 W YEARS WARRANTY CONTENTS 1 2 3 4 5 6 7 8 9 11 12 13 14 15