Fittings catalogue 2021

10.24 12345 12345 10 10 mm 100 mm 405192 284616 18W, 0.75 A 1 284617 30 W, 1.25 A 1.7 284618 60 W, 2.5 A 3.4 284619 80 W, 3.4 A 4.6 284620 120W, 5 A 6.9 3] 409452 284602 60 284569 406139 120 406140 284571 405206 405357 405203 405204 F U R N I T U R E L I G H T S Item in stock Item on demand LED strips, 24 V Ĺ Observe necessary work rules for sensitive electronics, for detailed information see p. 10.5. code description RGB Wi-Fi universal CCT / RGB / RGBW remote control control unit RGB / RGBW / CCT universal remote control / dimmer, 4 zones 4 channel RGB / RGBW / CCT control unit DISTRIBUTOR Input power: 14.4 W/m RGB • maximum length of continuous strip: 5 m • coil: 5 m RGB LED strips are not suitable for normal lighting. The light spectrum is limited and the light is not natural because the strips consist of colour seg- ments. The segments are intensively stressed in white light and their service life is lower than that of monochromatic LED strips. Tips for use: • house lighting • thematic lighting – an option to change the colour and intensity • terrace lighting, bar, shops, children's rooms • backlight of ceilings For the proper operation of LED strips, it is important to place it in an aluminium profile with a cover. 2] To calculate the power, multiply the length of the LED strip by its input power per meter. In case of a long-term load, we recommend increasing the power reserve. Ĺ For further types of 24 V transformers, see p. 10.27. 3] Do not exceed the maximum recommended length of the LED strips, divide them into multiple parts if necessary, and power them using multiple supply cables. Longer lines can be powered from both ends. 1] Do not place snap-on connectors near a hob, kettle or other source of steam and increased humidity. Connectors can oxidise. Snap-on connectors are only suitable in combination with profiles with sufficient space such as Fanto, Wide and Oval. At the connection point, the light may be interrupted or changed – the LED strip does not touch the profile at the connection. at the connection point, the LED strip and the connector need to be glued to the aluminium profile Ĺ for details about individual controls for RGB, see p. 10.48–10.4.9 CONTROLS RECOMMENDED TRANSFORMERS 2] RECOMMENDED CONNECTING CABLE code description Strong LED RGB distributor code power maximum length of LED strip (m) code description connecting cable to RGB (snap-on) 1] code protection rating luminous intensity (lm/m) number of diodes per 1 m IP20 Not listed for RGB IP65 (in gel) IP20 IP65 (in gel) CONTENTS 1 2 3 4 5 6 7 8 9 11 12 13 14 15