Fittings catalogue 2021

10.21 www.demos ‑trade.com 30000 [h] 405359 2,700–3,500 2,200 304 83 405360 3,500–5,000 2,500 405361 6,000–6,700 3,000 285094 134114 284618 60 W, 2.5 A 1.8 284619 80 W, 3.4 A 2.5 284620 120 W, 5 A 3.8 285093 10 mm 26 mm 134114 285094 285093 F U R N I T U R E L I G H T S LED strips, 24 V Ĺ Observe necessary work rules for sensitive electronics, for detailed information see p. 10.5. Input power: 26 W/m IP20 RECOMMENDED CONNECTING CABLES • maximum length of continuous strip: 5 m • coil: 5 m • LED strip with a very high chip density of 304 diodes/m • when lit, it forms a continuous line with no visible points • chips with high efficiency up to 130 lm/W • very strong luminous intensity (up to 3,000 lm/ m) code colour of light temperature (K) luminous intensity (lm/m) number of diodes per 1 m CRI Ra warm white neutral white cold white code description Mini connector (soldering), 1.8 m direct connection to transformer (soldering), 2 m 1] Do not place snap-on connectors near a hob, kettle or other source of steam and increased humidity. Connectors can oxidise. Snap-on connectors are only suitable in combination with profiles with sufficient space such as Fanto, Wide and Oval. At the connection point, the light may be interrupted or changed – the LED strip does not touch the profile at the connection. At the connection point, the LED strip and the connector need to be glued to the aluminium profile. Ĺ For further joining connectors, see p. 10.28– 10.32 For the proper operation of LED strips, it is important to place it in an aluminium profile with a cover. 2] To calculate the power, multiply the length of the LED strip by its input power per meter. In case of a long-term load, we recommend increasing the power reserve. Ĺ For further types of 24 V transformers, see p. 10.27. 3] Do not exceed the maximum recommended length of the LED strips. If necessary, divide them into multiple parts and power them using multiple supply cables. Longer lines can be powered from both ends. RECOMMENDED TRANSFORMERS 2] code power maximum length of LED strip (m) DISTRIBUTOR code description Mini, 6 outlets (individually up to 30 W), max. 100 W in total (0.25 m) Tips for use: • worktop lighting in the kitchen • desk lighting • backlight of ceilings CONTENTS