Fittings catalogue 2021

10.20 12345 12345 10 30000 [h] 342534 3,500–5,000 2,500 210 80 285094 134114 134114 285094 284617 30 W, 1.25 A 1,1 284618 60 W, 2.5 A 2.2 284619 80 W, 3.4 A 3 284620 120 W, 5 A 4.6 3] 285093 285093 8 mm 33,3 mm F U R N I T U R E L I G H T S Item in stock Item on demand LED strips, 24 V Ĺ Observe necessary work rules for sensitive electronics, for detailed information see p. 10.5. Tips for use: • worktop lighting in the kitchen • desk lighting • backlight of ceilings Input power: 21.6 W/m IP20 RECOMMENDED CONNECTING CABLES • maximum length of continuous strip: 5 m • coil: 5 m • LED strip with a very high chip density of 210 diodes/m • when lit, it forms an almost continuous line with no visible points • chips with high efficiency up to 115 lm/W • very strong luminous flux (up to 2,500 lm/m) code colour of light temperature (K) luminous intensity (lm/m) number of diodes per 1 m CRI Ra neutral white code description Mini connector (soldering), 1.8 m direct connection to transformer (soldering), 2 m 1] Do not place snap-on connectors near a hob, kettle or other source of steam and increased humidity. Connectors can oxidise. Snap-on connectors are only suitable in combination with profiles with sufficient space such as Fanto, Wide and Oval. At the connection point, the light may be interrupted or changed – the LED strip does not touch the profile at the connection. At the connection point, the LED strip and the connector need to be glued to the aluminium profile. Ĺ For further joining connectors, see p. 10.28–10.32. For the proper operation of LED strips, it is important to place it in an aluminium profile with a cover. 2] To calculate the power, multiply the length of the LED strip by its input power per meter. In case of a long-term load, we recommend increasing the power reserve. Ĺ For further types of 24 V transformers, see p. 10.27. 3] Do not exceed the maximum recommended length of the LED strips. If necessary, divide them into multiple parts and power them using multiple supply cables. Longer lines can be powered from both ends. RECOMMENDED TRANSFORMERS 2] code power maximum length of LED strip (m) DISTRIBUTOR code description Mini, 6 outlets (individually up to 30 W), max. 100 W in total (0.25 m) CONTENTS 1 2 3 4 5 6 7 8 9 11 12 13 14 15