Fittings catalogue 2021

10.17 www.demos ‑trade.com 8 mm 100 mm 30000 [h] 284616 18W, 0.75 A 2.5 284617 30 W, 1.25 A 4.1 284618 60 W, 2.5 A 8.3 284619 80 W, 3.4 A 11,1 3] 284620 120W, 5 A 16,6 3] 285093 285094 134114 342535 284554 2,700–3,500 580 60 80 284555 3,500–5,000 640 284556 6,000–6,700 700 134114 342535 285094 285093 F U R N I T U R E L I G H T S LED strips, 24 V Ĺ Observe necessary work rules for sensitive electronics, for detailed information see p. 10.5. Input power: 6 W/m IP20 • maximum length of continuous strip: 10 m • coil: 5 m • decorative intensity of lighting Tips for use: • strips for thematic lighting, suitable for interiors • staircase lighting • glass shelves lighting • television backlight • plinth lighting • night lighting • wardrobes For the proper operation of LED strips, it is important to place it in an aluminium profile with a cover. 2] To calculate the power, multiply the length of the LED strip by its input power per meter. In case of a long-term load, we recommend increasing the power reserve. Ĺ For further types of 24 V transformers, see p. 10.27. 3] Do not exceed the maximum recommended length of the LED strips. If necessary, divide them into multiple parts and power them using multiple supply cables. Longer lines can be powered from both ends. 1] Do not place snap-on connectors near a hob, kettle or other source of steam and increased humidity. Connectors can oxidise. Snap-on connectors are only suitable in combination with profiles with sufficient space such as Fanto, Wide and Oval. At the connection point, the light may be interrupted or changed – the LED strip does not touch the profile at the connection. At the connection point, the LED strip and the connector need to be glued to the aluminium profile Ĺ For further joining connectors, see p. 10.28–10.32. DISTRIBUTOR RECOMMENDED TRANSFORMERS 2] RECOMMENDED CONNECTING CABLES code power maximum length of LED strip (m) code description Mini, 6 outlets (individually up to 30 W), max. 100 W in total, 0.25 m code description Mini connector (soldering), 1.8 m direct connection to transformer (soldering), 2 m snap-on connector 1] with Mi ni end piece, 1 m code colour of light temperature (K) luminous intensity (lm/m) number of diodes per 1 m CRI Ra warm white neutral white cold white CONTENTS