Fittings catalogue 2021

10.13 www.demos ‑trade.com 8 mm 50 mm 30000 [h] 231394 2,700–3,500 1,160 60 250030 3,500–5,000 1,200 231388 6,000–6,700 1,260 285093 405179 18W / 1.5 A 1.25 405180 30 W / 2.5 A 2 405181 48 W / 4.0 A 3 405182 80 W / 6.6 A 5.5 3] 353250 120W, 10 A 8.3 3] 285094 134114 342535 285093 134114 342535 285094 F U R N I T U R E L I G H T S LED strips, 12 V Ĺ Observe necessary work rules for sensitive electronics, for detailed information see p. 10.5. Input power: 12 W/m IP20 • maximum length of continuous strip: 3 m • coil: 30 m • very strong lighting Tips for use: • worktop lighting in the kitchen • desk lighting • backlight of ceilings • wardrobes For the proper operation of LED strips, it is important to place it in an aluminium profile with a cover. 2] To calculate the power, multiply the length of the LED strip by its input power per meter. In case of a long-term load, we recommend increasing the power reserve. Ĺ For further types of 12 V transformers, see p. 10.26 3] Do not exceed the maximum recommended length of the LED strips. If necessary, divide them into multiple parts and power them using multiple supply cables. Longer lines can be powered from both ends. 1] Do not place snap-on connectors near a hob, kettle or other source of steam and increased humidity. Connectors can oxidise. Snap-on connectors are only suitable in combination with profiles with sufficient space such as Fanto, Wide and Oval. At the connection point, the light may be interrupted or changed – the LED strip does not touch the profile at the connection. At the connection point, the LED strip and the connector need to be glued to the aluminium profile Ĺ For further joining connectors, see p. 10.28–10.32. DISTRIBUTOR RECOMMENDED TRANSFORMERS 2] RECOMMENDED CONNECTING CABLES code colour of light temperature (K) luminous intensity (lm/m) number of diodes per 1 m warm white neutral white cold white code description Mini, 6 outlets (individually up to 30 W), max. 100 W in total, 0.25 m code power maximum length of LED strip (m) code description Mini connector (soldering), 1.8 m direct connection to transformer (soldering), 2 m snap-on connector 1] with Mi ni end piece, 1 m CONTENTS