Fittings catalogue 2021

10.6 12345 12345 10 1 500 mm 1 500 mm 1 500 mm 1 500 mm 1 500 mm 1 500 mm 2,5 mm 2,5 mm 50 mm 50 mm 33 mm 8 mm 10 mm 10 mm 12 m 5 m 355846 2,700–3,500 390 120 90 355847 3,500–5,000 410 355848 6,000–6,700 425 285110 285094 30000 [h] MINI 285110 285094 355856 36 W, 1.5 A 5 355857 60 W, 2.5 A 8.3 405173 75 W, 3.125 A 10.4 360507 100 W, 4.16 A 13.8 2] 355858 150 W, 6.25 A 20 2] F U R N I T U R E L I G H T S Item in stock Item on demand Strong Plus LED strips, 24 V Ĺ Observe necessary work rules for sensitive electronics, for detailed information see p. 10.5. Strong Plus – 6 W/m IP20 The CONSTANT CURRENT strip type allows installation in a continuous length of 20 m without a drop in luminous intensity. • LED strips with high-quality components, top parameters and extended warranty (5 years) • high CRI for true colour perception, more enjoyable than most conventional LED strips • special LED strip design CONSTANT CURRENT, ensuring a minimal drop in luminous intensity even in a long line and power supply from only one end • especially suitable for long installations • maximum length of continuous strip: 12 m, the strip may have a continuous length of up to 20 m, but the original connecting cables with the connector then cannot be used – they must be replaced by stronger conductors, at least 18 AWG, 2 × 0.5 mm 2 , or must have a power supply from both ends • coil: 12 m • cabling: 2 × 1.5 m, finished with Mini connectors • decorative intensity of lighting Tips for use: • strips for thematic lighting, suitable for interiors • decorative light around the bed/ceiling • staircase lighting • glass shelves lighting • television backlight • plinth lighting • night lighting • wardrobes For the proper operation of LED strips, it is important to place it in an aluminium profile with a cover. 1] To calculate the power, multiply the length of the LED strip by its input power per meter. In case of a long-term load, we recommend increasing the power reserve. Ĺ A detailed overview of transformers with a 5-year warranty can be found on page 10.9. 2] Do not exceed the maximum recommended length of the LED strips. If necessary, divide them into multiple parts and power them using multiple supply cables. Longer lines can be powered from both ends. In order to achieve optimal function, it is recommended to have the transformer as close to the light source as possible. Longer cables cause loss of voltage and consequently a drop in luminous intensity. They may also have disturbing influence on nearby electrical appliances. RECOMMENDED TRANSFORMERS 1] WE RECOMMEND: connectors are on both ends of the LED strip code colour of light temperature (K) luminous intensity (lm/m) number of diodes per 1 m CRI Ra warm white neutral white cold white code description Mini extension cable, 1.8 m connecting cable for soldering, Mini connector, 1.8 m YEARS WARRANTY code power maximum length of LED strip (m) CONTENTS 1 2 3 4 5 6 7 8 9 11 12 13 14 15