Furniture fittings catalogue 2019

7 7.4 12345 12345 4,0 × 50 360297 50 35 7,0 T20 4,0 × 60 360298 60 40 7,0 T20 4,5 × 50 362693  50 35 8,0 T20 360295 25 T20 360296 50 T20 k 75 k k k k 75 k částečný závit MDF čočkovitá hlava normální vrut 360281 16 13 7,5 PZ2 360282 20 16 7,5 PZ2 360283 30 25 7,5 PZ2 360284 16 13 8,0 PZ2 360721 20 16 8,0 PZ2 360285 30 25 8,0 PZ2 360286 30 18 8,0 PZ2 360722 35 30 8,0 PZ2 360723 40 35 8,0 PZ2 360740 45 40 8,0 PZ2 360287 50 45 8,0 PZ2 C O N N E C T I N G F I T T I N G S Spax screws Item in stock Item on demand • particularly suitable for MDF boards • no pre-drilling, 1] reducing the risk of material rupture and bulging • Cut tip with a corrugated thread for easy drilling-in • special narrow head with an angle of 75° with a milling drive for clean countersink • partial thread for firm tightening of the top part • Wirox finish has 20 times higher corrosion resistance compared to conventional screws • the above mentioned advantages combined with T-Star plus drive • we recommend using original T-Star plus bits to ensure perfect operation • shoulder ensures better centring and transmis- sion of force, prevents slipping at lateral pressure • working with conventional Torx bits will not allow to take full advantage of the improved drive • also used as a substitution for the confirmat • size 4.5 × 50 is ideal for connecting LTD • the above mentioned advantages combined with PZ (Pozidrive) cam-out drive • the advantage of the cam-out drive is a deeper design that ensures quality torque transmission even when the bit deflects from the axis (up to 5°) 1] partial thread is particularly suitable for clamping two boards • we recommend using original T-Star plus bits to ensure perfect operation • shoulder ensures better centring and transmission of force, prevents slipping at lateral pressure • working with conventional Torx bits will not allow to take full advantage of the improved drive Spax M screws Spax Pozidrive screws T-Star plus tightening bits size (d1) (mm) code total length (Ls) (mm) thread length (LgV) (mm) outer diameter of the head (dk) (mm) bit 3.5 × 16 3.5 × 20 3.5 × 30 4.0 × 16 4.0 × 20 4.0 × 30 4.0 × 30/18, partial thread 1] 4.0 × 35 4.0 × 40 4.0 × 45 4.0 × 50 size (d1) (mm) code total length (Ls) (mm) thread length (LgV) (mm) outer diameter of the head (dk) (mm) bit code bit length (mm) type Pozidrive bits can be found in Chapter 14, p. 14.4 1] some materials may require pre-drilling, we recommend testing CONTENTS 1 2 3 4 5 6 8 9 10 11 12 13 14 15