Furniture fittings catalogue 2019

LIBRA H1 PAT. PENDING LIBRA is the innovative family of CABINET HANGERS and WALL PLATES especially conceived to satisfy all the customer's needs. The LIBRA hangers are to be installed behind the rear panel with the only small cover caps left visible inside the cabinet. LIBRA is a very resistant and reliable solution as the zinc-coated s teel body is sensibly thicker, and therefore stronger. All the models within the LIBRA family feature an innovative ANTI-TURNOVER device which is covered by patent. LIBRA H1 is the universal screw fixing cabinet hanger. Also featured in the LIBRA family are 5 types of wall plates and 1 types of wall bars made of very thick zinc-coated steel and hardened by punched impressions. Wall bars and wall plates feature oval holes which facilitate the correct positioning and give the possibility to carry out the horizontal adjustment. Placement of the holes for wall-fixation has been optimised to reduce the stress on the plates and on the plugs. LIBRA cabinet hangers allow to adjust the cabinet vertically and horizontally. The 2 movements are 100% INDEPENDENT of each other and therefore make the adjustments much easier and more efficient. The adjustment and the locking of the ANTI-TURNOVER bolt can be carried out from the inside of the cabinet by using a standard PZ2 screwdriver. Capacity Loading 75 Kilos per piece in accordance with the regulation DIN 68840 Steel, Zinc alloy and Engineering plastic according to related version. Part. no 63420010ZN Description Cabinet hanger Libra H1 For wall plates and cover caps see the related pages. 12 18,5 15 min. 31 42 DRILLING PLAN FOR CABINET HANGER FIXED UNDER THE CABINET TOP OTHER APPLICATIONS FOR CABINET HANGER NOT FIXED TO THE TOP recommended fixing screws Ø3,5x20 recommended fixing screws Ø3,5x20 recommended fixing screws Ø3,5x20 16-21 Drilling plan for Libra CC1 cover cap Drilling plan for Libra CC2 cover cap 40 24,5 Ø30 18,5 15 min. 1 Ø30 40 24,5 2 15 min. 18,5 1 2 3 Ø30 40 24,5 2 15 min. 18,5 Ø30 40 24,5 2 15 min. 18,5 Ø30 40 24,5 2 15 min. 18,5 1 2 3 12 18,5 15 min. 54,5 42,5 25 31 16 4,4 3,2 56,5 12 18,5 15 min. 54,5 42,5 25 31 16 4,4 3,2 56,5 361269 hidden adjustable hinges F U R N I T U R E H I N G E S A N D L I F T F I T T I N G S 1.65 www.demos-trade.com • locking bolt against cabinet unhinging in accordan e with the standard EN14749 • load capacity 150 kg / pair • height adjustment 13 mm, depth adjustment 12 mm • for body depth up to 350 mm (top cabinets) • for mounting on the wall, the 352537 rail can also be used The set includes: –– pair of hinge fittings and cover caps –– mounting template –– hinge plate –– screws int the body 1 – height adjustment 2 – adjustment of offset from the wall 3 – safety latch against unhinging drilling the holes for adjustment fixing of the fitting recommended fastening screws ø 3.5 × 20 16-21 offset of the back hinges on p. 1.41-1. 4, lifts on p. 1.93-1.112 screws and euro screws on p. 7.3-7.11 Libra H1 inge fittings with locking code description set for one cabinet (including template) CONTENTS