Furniture fittings catalogue 2019

5 5.118 12345 12345 0,4 xH H> 1000 25 ≥ 45 ø 5 x 12 0,4 xH 40 - 100 mm LB L ≤ 50 L=LB-1 40 - 100 mm LB L ≤ 50 L=LB-1 a b 55 84 84 55 30 55 54 54 55 0 a b 55 84 84 55 30 55 54 54 55 0 210115 9136105 210476 9145851 210116 9136106 D O O R F I T T I N G S Item in stock Item on demand Optimum weights for each type of the pane can be found on page 5.3 SysLine S 1] 210115 –– top thickness at least 16 mm –– door thickness max.19 mm –– aluminium without surface finish –– the maximum distance of the last hole from the end of the profile is 50 mm, if the last hole is at a distance larger than 50 mm after shortening the profile, a new hole must be drilled 2] 210476 –– top thickness at least 16 mm –– aluminium without surface finish 3] 210116 –– top thickness at least 19 mm –– cannot be used for MDF and hardwood –– aluminium without surface finish –– the distance between the last rotary safety lock and the end of the profile must be at least 40 mm and no more than 100 mm, this must be taken into account when shortening Drilling for door backstop / spacer. Positioning of activator for opening with overlay. Shortening guide profiles. Positioning of activator for opening into alignment. code Hettich code description top guide profile, double, 2 m 1] top guide profile, simple, 2 m 2] top guide profile, simple, with rotary safety locks, 2 m 3] Guide profiles fittings for sliding doors with top guide CONTENTS 1 2 3 4 6 7 8 9 10 11 12 13 14 15