Furniture fittings catalogue 2019

5 5.104 12345 12345 2600 700 – 2000 19 – 50 5.107 2600 700 – 1500 16 – 40 5.111 2600 700 – 1500 16 – 40 5.109 – 110 2300 500 – 1250 15 – 19 5.112 2500 500 – 3000 16 – 19 5.113 – 114 2000 min. 500 16 – 19 5.113 – 114 D O O R F I T T I N G S fittings for sliding doors Item in stock Item on demand Optimum weights for each type of the pane can be found on page 5.3 TopLine The advantages of sliding doors are reflected in everyday use. According to the majority of customers, sliding doors are worth considering in terms of ergonomics and comfort. And for good reason: open sliding doors do not hinder in narrow aisles between the furniture. At top cabinets, there is no risk of injury caused by open doors. In addition, sliding doors can be operated comfortably without leaning forward or standing on toes. The fittings Hettich for sliding doors with the top bearing profile allows for an elegant design. In bedrooms and living rooms, sliding doors are a solution for generous use of cabinet storage space. Clear access to the contents of the cabinet without open doors stretching out into the interior. Doors run easy and silently, they close quietly thanks to dampers Silent System (SiSy). First, select the fittings that will best suit your requirements from the table below. In the table, you will find a short comparison of the individual types TopLine (XL, L, M, 1 and 25/27) – the load capacity, width and height of doors, their number, as well as the placement of the guide profile and method of damping. At the end of the table, there is a link to the relevant page. There you will find another table with the specification of required fittings. You will choose according to the thickness and number of leaves, their layout, the requirement for the opening position and the method of damping. Order codes are then indicated in the table. 1] in addition, collision damping How to choose the right type of the fittings? type of fittings leaf (mm, kg) page height width thickness weight (max.) door location number per cabinet damping TopLine XL 80 full overlay 1 to 4 in both directions 1] TopLine L profile on the top 50 full overlay 1 to 3 in both directions TopLine profile in front of the top 50 full overlay 1 to 3 in both directions TopLine M 35 full overlay 1 to 3 only closing TopLine 1 50 or 75 inset 1 to 3 - TopLine 25 and 27 25 inset 1 to 3 only closing CONTENTS 1 2 3 4 6 7 8 9 10 11 12 13 14 15