Furniture fittings catalogue 2019

5 5.96 12345 12345 351707 351706 DT157 1 2 2250 11,5 A 9 10,5 11,5 5 5 ø35 1 2 a b D O O R F I T T I N G S door braces Item in stock Item on demand Optimum weights for each type of the pane can be found on page 5.3 Door brace Sliding doors brace • pane: min. 18 mm • maximum pitch: 2,250 mm • one piece is sufficient for width of up to 750 mm, two pcs for wider leaves • in case of very wide leaves, it is advisable to use braces also in the horizontal direction • prevents the deflection of sliding doors with bottom guide; we recommend to use it for all doors with above-standard height or width or for doors with a glued mirror, etc. • solution with threaded bars allows shortening to any pitch • 4 fasteners are included in the set for better fixation of the bar in the cut-out Use • if the doors are in the position 1 , screw the nut “P” in the direction a , or for the door position 2 screw in the opposite direction (direction b ) Installation After milling-in grooves and deepening for cups, cut threaded bars and cover caps for threaded bars. Slide cover caps on threaded bars and insert into grooves. The central cover cap has a dilatation area 5 mm on each side. Secure cover caps with attached fasteners. Download instructions on the portal. • high-quality brace preventing tall door leaves from deflecting • metal cups, high strength, plastic cover of draw bars • one piece is sufficient for width of up to 750 mm, two pcs for wider leaves code hinge pitch A (mm) 2,248 • can be cut by up to 210 mm on each side code colour white black Doors brace 2,250 mm CONTENTS 1 2 3 4 6 7 8 9 10 11 12 13 14 15