Furniture fittings catalogue 2019

5.87 www.demos ‑trade.com 90106 90105 228023 228083 229433 361759 98077 98078 227185 227187 38,7 33 D O O R F I T T I N G S built-in sliding cabinets – 18 mm Optimum weights for each type of the pane can be found on page 5.3 Handle Universal • length 2.7 m, for LDF 18 mm or LDF 12mm + mirror 1]  • this profile is recommended by the manufacturer, other profiles for 18 mm can be used while preserving precision of the cut colour code silver olive set of top trolleys set of bottom trolleys backstop brush dust brush L = length of guide Everest L min = 2 / 3 D L max = D X = bevel length d s = width of angled leaf d s ≥ × description code guide rail Everest 3 m silver set of trolleys for auxiliary guide • the damper can be used on the angled part only if the angled leaf has a sufficiently long horizontal part in the length of the damper for other accessories, see p. 5.69 - 5.70 table of calculations is on p. 5.75 bottom, double lamino 18 mm ball bearings load 50 kg • the maximum leaf size when using a mirror is 2,400 × 700 mm • use a double-sided adhesive tape for connection LDF 12 mm and the mirror use a bracket for the door bottom edge (see p. 5.71) • universal damper, also replaces 1 top trolley • package contains 2 pcs – right + left • dampers are also available individually, right and left versions • the damper can be used on the angled leaf only if the angled leaf has a sufficiently long horizontal part for damper installation • positioning of the double-sided adhesive tape in the case of a combination of LDF (laminated) 12 mm + glass 4 mm Damper for leaf weight 14-25 kg for leaf weight 25-50 kg Solution for angled doors – system Everest • at least 3 leaves must be used for this set • angled leaf must be the rear one CONTENTS