Furniture fittings catalogue 2019
5 5.84 12345 12345 89134 89133 89050 89052 89137 89136 89053 89055 89140 89139 89056 89058 18 19 17 11 318662 283956 351743 318663 283955 1 2 h = H - 45 mm 18mm 3,5x25 4 mm SV 40 * * 1 2 h = H - 45 mm 18mm 3,5x25 4 mm SV 40 * * D O O R F I T T I N G S built-in sliding cabinets – 18 mm Item in stock Item on demand Optimum weights for each type of the pane can be found on page 5.3 Dampers 1] bracket K2 Decor can be provided with a decorative foil • they are required when using a combination of LDF 12 mm + glass – they secure the pane against sliding down Brackets profile length bracket Mini 11 × 17 mm bracket K2 Decor 19 × 18 mm silver olive silver olive 1.7 m 2.35 m 3 m • for leaves with weight of up to 25/40/60 kg • 3 heights of trap in the package, for fine adjustment • when using in simple rail Single, gently grind the bottom edges of the trap so it touches the rail with its entire surface • double-sided damper, for the middle leaf; it allows opening to both sides, stops the middle leaf in a central position • for leaves with weight of up to 25/40 kg • Note that the system requires reducing the leaf height the total leaf height must be 44 mm less than the height of the hole. • when using in simple rail Single, gently grind the bottom edges of the trap so it touches the rail with its entire surface Mini SV-25 (14 - 25 kg) Mini SV-40 (25-40 kg) Mini SV-60 (40-60 kg) Central SV-25 (double-sided) up to 25 kg Central SV-40 (double-sided) up to 40 kg • detailed instructions on individual dampers are available for download on the portal, identified by a code Important warning When the door is closed for the first time, dampers are not activated. Close the leaf slowly to activate dampers (click). Rapid impact can damage the damper as the leaf strikes the end position without damping! Always carry out before handing over to the customer to prevent possible problems. description code description code CONTENTS 1 2 3 4 6 7 8 9 10 11 12 13 14 15
Made with FlippingBook
RkJQdWJsaXNoZXIy MzEyMDA=