Furniture fittings catalogue 2019

5 5.74 12345 12345 227185 227187 318662 283956 351743 318663 283955 1 2 h = H - 45 mm 18mm 3,5x25 4 mm SV 40 * * 1 2 h = H - 45 mm 18mm 3,5x25 4 mm SV 40 * * D O O R F I T T I N G S built-in sliding cabinets – 18 mm Item in stock Item on demand Optimum weights for each type of the pane can be found on page 5.3 Standard dampers for systems 10 and 18 mm • replace top trolleys • adjustable width – can be used for standard guide as well as guide Comfort and Maxim • for correct operation, correct adjustment with respect to the rail width and positions in the rail must be carried out • handle must not touch ra ils, distances must be the same as when using conventional trolleys in order to prevent leaf torsion • for leaves with weight of up to 25/40/60 kg • 3 heights of trap in the package, for fine adjustment • when using in simple rail Single, gently grind the bottom edges of the trap so it touches the rail with its entire surface description code for leaf weight 14-25 kg for leaf weight 25-50 kg • package contains 2 pcs – right + left • dampers are also available individually, right and left versions Mini SV-25 (14 - 25 kg) Mini SV-40 (25-40 kg) Mini SV-60 (40-60 kg) Central SV-25 (double-sided) up to 25 kg Central SV-40 (double-sided) up to 40 kg • detailed instructions on individual dampers are available for download on the portal, identified by a code Attention! Before inserting doors, stretch the damper trap. Do not install positioner if using dampers. Sevroll dampers Important warning When the door is closed for the first time, dampers are not activated. Close the leaf slowly to activate dampers (click). Rapid impact can damage the damper as the leaf strikes the end position without damping! Always carry out before handing over to the customer to prevent possible problems. • double-sided damper, for the middle leaf; it allows opening to both sides, stops the middle leaf in a central position • for leaves with weight of up to 25/40 kg • when using in simple rail Single, gently grind the bottom edges of the trap so it touches the rail with its entire surface Note that the system requires reducing the leaf height, the total leaf height must be 44 mm less than the height of the hole. CONTENTS 1 2 3 4 6 7 8 9 10 11 12 13 14 15