Furniture fittings catalogue 2019

5.43 www.demos ‑trade.com 284545 284546 284551 284547 284549 284550 D O O R F I T T I N G S sliding inset cabinet doors Optimum weights for each type of the pane can be found on page 5.3 Strong Linio min. 18 mm ball bearings load 40 kg code description set for 2 leaves, 4× damper set for 3 leaves, 4× damper code description for a 3-leaf set code length (m) 1.5 2 3 • elegant solution for inset doors • guide milled-in the corpus, min. th. 18 mm • quiet run, high-quality bearings for long service life • damping hidden in guide for silent closing of the leaf • simple regulation, safety lock for easy leaf installation • the set includes trolleys in the appropriate quantity, guide end pieces, fasteners and a hex key • for central damper mounting the middle leaf must be in the back or the space between the leaves must be enlarged to allow other leaves to move • central damper should be mounted to the cabinet body, pin on leaf • surface finish – anodised silver bottom guide Mounting information: 1. Before inserting the guide into the body, insert dampers and end pieces to the rail. Please mind the correct orientation of the damper – arrows must point to the body centre. 2. Draw dampers in the working position (according to the arrow – towards the body centre). 3. Before installing the leaf, push top trolleys in installation position and secure them with a safety lock. 4. Insert the leaf into the bottom rail, then direct the top trolley to the top rail and release the safety lock. 5. Warning – leaf deflection during installation must not exceed 20°, otherwise the guide or even the body may damage! 6. Regulate the leaf position, then secure against unhooking by tightening the top trolley. 7. Align and secure the position of damping to close the door to the cabinet side properly. Top/bottom guide Central damper CONTENTS