Furniture fittings catalogue 2019

5.11 www.demos ‑trade.com 28 468 0 1,5 DT303 2 28 468 1 2,5 DT304 3 DT174 6 DT3 36 DT300 2 165 44 DT333 DT334 DT335 DT199 133383 135251 Art. 1380/SFS Art.1380 Art.1280 D O O R F I T T I N G S sliding interior door Optimum weights for each type of the pane can be found on page 5.3 • high-quality needle roller bearings, turned castors for quiet operation • set for heavy leaves, with damping option • when attached to the wall, maximum leaf thickness is 40 mm code description set of fittings for one leaf without damping set of fittings for 1 leaf, 2× air damper 1]  1] minimum leaf width 1,094 mm code length (m) code description guide bracket Art. 127/DV top guide min. 25 mm ball bearings load 120 kg • the quality of operation depends on how firmly the guide is mounted – no bending, twisting, etc. • in case of lower load capacity of the wall, increase the number of brackets • check the planarity of brackets before mounting Top guide Art. 1280 Required number of brackets for wall mounting length (m) 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 number of brackets 4 5 6 7 7 8 9 10 11 12 Interior door fittings with load capacity 120 kg • fittings for gradual opening of leaves – see p. 5.14 and 5.15 • wood lining bracket / side cover cap of cover profile code description cover profile 2 m Art. 1380 cover profile 3 m Art. 1380 cover profile 6 m Art. 1380 set for synchronous opening 2] wood lining bracket 2] further deta ils – see p. 5.16 side cover cap of cover profile OPTIONAL ACCESSORIES Important warning When the door is closed for the first time, dampers are not activated. Close the leaf slowly to activate dampers (click). Rapid impact can damage the damper as the leaf strikes the end position without damping! Always carry out before handing over to the customer to prevent possible problems. double-sided handles in Chapter 15 CONTENTS