Furniture fittings catalogue 2019

1.135 www.demos ‑trade.com 50° 65° 37 F F + 3 mm, - 0,5 mm 4 mm 50° 65° 5 41 F - 3 mm, + 0,5 mm 5 mm F 4 mm 50° 65° 37 F F + 3 m , - 0,5 mm 4 mm 50° 65° 5 41 F - 3 m , + 0,5 mm 5 mm F 4 mm 104076 45036 288352 9099750 66 -3 298415 9099810 66 -3 288353 9099760 75,5 6,5 300505 9099820 75,5 6,5 264245 9090756 300465 9090864 90° H 70 * T 52 11,6 C 5,5 ø35 Intermat hinges for clicking-in on a plate F U R N I T U R E H I N G E S A N D L I F T F I T T I N G S Option A – holes for cups in one door Enables optimisation of the gap between the leaves to a minimum. Dimension C is identical on both sides of the door. Both leaves may be equally wide. Space between the holes for the plate on the loose leaf is 37 mm. For door thickness 16-21 mm. Option B – holes for cups in both doors The gap between leaves is 5 mm. Dimension C is identical for both doors. Both leaves may be equally wide. Space between the holes for the plate on the leaf is 41 mm. For door thickness 16-21 mm. Door width calculation: hole clearance for the door including the body side − gap F − door thickness Recommended height of the mounting plate 1] C = 4.5 mm: height of the plate D = 0 C = 3.0 mm: height of the plate D = 1.5 1] different drilling C can be compensated by depth and diagonal adjustment Drawing – option A Drawing – option B Door width calculation: hole clearance for the door including the body side − gap F − door thickness − 5 Recommended height of the mounting plate 1] C = 4.5 mm: height of the plate D = 0 C = 3.0 mm: height of the plate D = 1.5 Intermat, opening angle 165° hinge, e.g. with great opening angle Sensys hinge, e.g. with great opening angle Sensys diagonal adjustment diagonal adjustment depth adjustment depth adjustment adjustment of assembly 4 mm adjustment assembly gap F loose door loose door minimum gap minimum gap gap F gap F gap F Type of cup cup TH 52 for screwing-on for mounting plates, see p. 1.127 pistons for P2O on page 1.131 With an opening angle of 165° and a zero overlap to the inner clearance of the body code Hettich code description H (mm) T (mm) full overlay full overlay, P2O half overlay half overlay, P2O restrictor 105/120° restrictor 90/135° With an opening angle of 50/60°, for folding door code Hettich code description with diagonal adjustment depending to the door thickness CONTENTS