Furniture fittings catalogue 2019

12.15 www.demos ‑trade.com 9/13 9 12,5 2,5 13/17 11,4 35 13 4 2,9 R48,5 R42 R35,5 min R R48,5 R42 R35,5 min R R48,5 R42 R35,5 min R F U R N I T U R E S H U T T E R S guide systems overview • guide rails are embedded into a pre-milled groove inside the cabinet • milling width 13 mm (for 8 mm), or 17 mm (for 12 mm – suitable for high shutters with horizontal movement) • milling depth 12.5 mm Recommended roller shutter profiles: –– E23 Plastic (8 mm), p. 12.17 –– E9 Plastic (8 mm), p. 12.20 –– E4 Plastic (12 mm), p. 12.19 Winding system: –– backwards –– to the winding device Applicable mechanisms for vertical guide: –– C8 –– Caddy –– C6 • flexi guide allows the roller shutter to be curved into an arch • winding into the winding device can be formed from the guide profile while keeping minimum arch size milling width 13 mm, milling depth 12.6 mm • guide rails are embedded into a pre-milled groove inside the cabinet • guide profile available in black and grey only • a negative radius cannot be used because the armature opens apart only in one direction Recommended roller shutter profiles: –– E23 Plastic (8 mm), p. 12.17 –– E9 Plastic (8 mm), p. 12.20 Winding system: –– backwards –– into the winding device formed from a guide profile Applicable mechanisms for vertical guide: –– C8 –– Caddy –– C6 Milled-in Classic guide – 8 mm and 12 mm Milled-in Flexi guide for more information, see p. 12.17 for more information, see p. 12.21 further drawings on p. 12.18 below • all-plastic guide • simple assembly: no milling, just adjust the length of the rail and screw • possible additional assembly into already completed cabinets • assembly with guide corners and attachment with screws • guide rails are parallel with the inside edge of the cabinet • for the guide rails intended for the roller shutter profiles in the colour of aluminium (plastic) and wood decor are guide rails only in the Uni colours (decor with no pattern) Recommended roller shutter profiles: –– E23 Plastic (8 mm), p. 12.21 Winding system: –– backwards Applicable mechanisms for vertical guide: –– C8 –– C6 –– possible also with C3 after adjusting the guide profile Inset Top Basic guide – screwed CONTENTS