Furniture fittings catalogue 2019

10.17 www.demos ‑trade.com 8 mm 100 mm 30000 [h] 134114 342535 285094 SAL301 284616 18W, 0,75 A 2,5 284617 30 W, 1,25 A 4,1 284618 60 W, 2,5 A 8,3 3] 284619 80 W, 3,4 A 11,1 3] 284620 120W, 5 A 16,6 3] 285093 134119 285094 SAL301 134114 342535 284554 2700–3500 580 60 80 284555 3500–5000 640 284556 6000–6700 700 L I G H T S LED pásky 24 V Observe necessary work rules for sensitive electronics, for detailed information see p. 10.5 Input power 6 W/m IP20 • maximum length of continuous strip: 10 m • coil: 5 m • decorative intensity of lighting Tips for use: • strips for thematic lighting, suitable for interiors • staircase lighting • glass shelves lighting • television backlight • plinth backlight • night lighting • wardrobes For the proper operation of LED strips, it is important to place it in an aluminium profile with a cover cap. 2] To calculate the power, multiply the length of the LED strip with its input power per meter. In case of a long-term load, we recommend increasing the power reserve. For other types of 24 V transformers, see p. 10.22 3] Do not exceed the maximum recommended length of the LED strips. If necessary, divide them to multiple parts and supply them with a higher number of supply cables. Longer lines can be powered from both ends. 1] Do not place snap-on connectors near a hob, kettle or other source of steam and increa- sed humidity. Connectors can oxidise. Snap-on connectors are only suitable in combination with profiles with sufficient space such as Fanto, Wide and Oval. At the connection point, the light may be interrupted or changed – the LED strip does not touch the profile at the connection. At the connection point, the LED strip and the connector need to be glued to the aluminium profile. DISTRIBUTORS RECOMMENDED TRANSFORMERS 2] RECOMMENDED CONNECTING CABLES code power maximum length of LED strip (m) code description Mini, 6 outlets (individually up to 30 W), total max. 100 W, 0.25 m AMP, 12 outlets (individually up to 30 W), total max. 72 W, 0.5 m code description Mini connector (soldering), 1.8 m AMP connector (soldering), 2 m direct connection to transformer (soldering), 2 m snap-on connector 1] with Mini end piece, 1 m code colour of light temperature (K) luminous intensity (lm/m) number of diodes per 1 m CRI Ra warm white neutral white cold white CONTENTS