Furniture fittings catalogue 2019

10.15 www.demos ‑trade.com 10 mm 50 mm 134114 342536 285094 SAL301 30000 [h] 157844 2700–3500 1 080 60 132276 6000–6700 1 170 134110 18W / 1,5 A 1 134111 30 W / 2,5 A 1,5 134112 48 W / 4,0 A 2,7 134113 80 W / 6,6 A 4,6 3] 353250 120W, 10 A 6,9 3] 285093 134119 285094 SAL301 134114 342536 L I G H T S LED strips 12 V Observe necessary work rules for sensitive electronics, for detailed information see p. 10.5 Input power 14.4 W/m IP20 • maximum length of continuous strip: 3 m • coil: 30 m • very strong lighting Tips for use: • worktop lighting in the kitchen • desk lighting • backlight of ceilings • wardrobes For the proper operation of LED strips, it is important to place it in an aluminium profile with a cover cap. 2] To calculate the power, multiply the length of the LED strip with its input power per meter. In case of a long-term load, we recommend increasing the power reserve. For other types of 12 V transformers, see p. 10.21 3] Do not exceed the maximum recommended length of the LED strips. If necessary, divide them to multiple parts and supply them with a higher number of supply cables. Longer lines can be powered from both ends. 1] Do not place snap-on connectors near a hob, kettle or other source of steam and increased humidity. Connectors can oxidise. Snap-on connectors are only suitable in combination with profiles with sufficient space such as Fanto, Wide and Oval. At the connection point, the light may be interrupted or changed – the LED strip does not touch the profile at the connection. At the connection point, the LED strip and the connector need to be glued to the aluminium profile. DISTRIBUTORS RECOMMENDED TRANSFORMERS 2] RECOMMENDED CONNECTING CABLES code colour of light temperature (K) luminous intensity (lm/m) number of diodes per 1 m warm white cold white code power maximum length of LED strip (m) code description Mini, 6 outlets (individually up to 30 W), total max. 100 W, 0.25 m AMP, 12 outlets (individually up to 30 W), total max. 72 W, 0.5 m code description Mini connector (soldering), 1.8 m AMP connector (soldering), 2 m direct connection to transformer (soldering), 2 m snap-on connector 1] with Mini end piece, 1 m CONTENTS