Furniture fittings catalogue 2019

10.11 www.demos ‑trade.com 8 mm 50 mm 30000 [h] 134114 285094 SAL301 132267 2700–3500 360 60 132266 6000–6700 390 285093 134119 134110 18W / 1,5 A 3 134111 30 W / 2,5 A 5,2 134112 48 W / 4,0 A 8,3 3] 134113 80 W / 6,6 A 13,8 3] 353250 120W, 10 A 20,8 3] 285094 SAL301 134114 L I G H T S LED strips 12 V Observe necessary work rules for sensitive electronics, for detailed information see p. 10.5 Input power 4.8 W/m IP65 • waterproof construction 1] • if used in wet environments, spots that could come into contact with water must be insulated with silicone sealant • maximum length of continuous strip: 5 m • coil: 5 m • decorative intensity of lighting 1] We do not recommend this type of LED strip for long-term lighting because of poor heat dissipation. Lamino, glass, etc., do not provide sufficient heat dissipation. There is a risk of burning the diodes, damaging the protective coating. Recommended duration of continuous lighting max. 60 min. Damage by overheating is not subject to warranty. Tips for use: • strips for thematic lighting, suitable for exterior • outdoor staircase lighting • decorative lighting of the house, arbours, balconies • bathroom lighting For the proper operation of LED strips, it is important to place it in an aluminium profile with a cover cap. 2] To calculate the power, multiply the length of the LED strip with its input power per meter. In case of a long-term load, we recommend increasing the power reserve. For other types of 12 V transformers, see p. 10.21. 3] Do not exceed the maximum recommended length of the LED strips. If necessary, divide them to multiple parts and supply them with a higher number of supply cables. Longer lines can be powered from both ends. DISTRIBUTORS RECOMMENDED TRANSFORMERS 2] RECOMMENDED CONNECTING CABLES code colour of light temperature (K) luminous intensity (lm/m) number of diodes per 1 m warm white cold white code description Mini, 6 outlets (individually up to 30 W), total max. 100 W, 0.25 m AMP, 12 outlets (individually up to 30 W), total max. 72 W, 0.5 m code power maximum length of LED strip (m) code description Mini connector (soldering), 1.8 m AMP connector (soldering), 2 m direct connection to transformer (soldering), 2 m CONTENTS