Furniture fittings catalogue 2019

www.demos ‑trade.com 10.3 L I G H T S  Differences between 12 V and 24 V LED strips 12 V LED strips + general extensive use + divisible after every 3 diodes − a more noticeable drop in voltage and a change in light intensity if used in long series  24V LED strips + decrease in luminous intensity is not as noticeable as for 12 V LED strips + 24 V switches usually have a double power than 12 V switches + warm up less than 12 V strips − divisible after every 6 diodes Strong Plus series for installing difficult-to-replace lights, we recommend using Strong Plus lights and accessories series for a high-quality parameters requirement Pluses of Strong Plus series –– 5-year warranty 1] –– index ofcolour display (CRI Ra) > 90, high colour fidelity 2] –– quality adhesive layer with high heat dissipation 3] –– high-quality components (undercoat layer for lower drop in luminous intensity), Strong Plus series – possible continuous length of up to 20 m (6 W LED strips) 1] Extended warranty includes only the replacement of goods piece-for-piece, other refunds are excluded. Installation in accordance with the instructions is a condition for acknowledging the replacement. 2] A more faithful display of colours, the lower the index, the more difficult to recognise individual colours, distortion occurs, etc. 3] Certain surfaces, such as some types of powder paints, have worse adhesion, and for long-term use, we recommend testing adhesion with the LED strip switched-on (heated). Before application, the surface should be thoroughly cleaned, degreased, or used with an adhesive bridge. Custom made production From our aluminium profile, LED strips, switches and transformers, we will make lights according to your wishes. Before you place your order for lights into production, it is good to consider a few details: –– type of space the light is determined for – what type of a LED strip you want to use (colour of light, intensity) –– how it should be installed in the furniture/interior – to what type of profile, its location, layout –– what type of switch you want to use for switching on – can influence cable management system – for larger set, it is possible that the considered switch may not have the required power – some types of switches (into aluminium profiles) may not work with multi-part sets For production it is necessary to specify: –– lengths of individual parts, division, type of LED strips, profiles, individual components (transformers, switches) –– required positioning of the supply cables (placement of lead/switch) –– requirements for divisibility (e.g., interruption of the line by a hood), multiple forks, corners, etc. –– whether you require to cut LED profiles at specific lengths, whether the length includes end pieces Our Excel form with a complete offer and clear selection, which you can download on our website, will assist you. The form will guide you step-by-step and will recommend required components. We offer free training for regular customers. During the training, you will be presented with selected samples, their use and application in practice. You will be also advised on proper technical connection when executing orders. CONTENTS