10.13 www.demos‑trade.com Ls LgV Ød1 Ødk Ø10 Ls LgV Ød1 Ødk Ls LgV Ødk Ød1 6 × 60 360300 60 56 13,6 T30 6 × 80 360301 80 61 13,6 T30 6 × 100 / 61 360302 100 61 13,6 T30 6 × 120 / 68 360303 120 68 13,6 T30 6 × 140 / 68 360304 140 68 13,6 T30 6 × 160 / 65 360305 160 65 13,6 T30 8 × 80 360306 80 70 20,0 T40 8 × 100 / 80 360307 100 80 20,0 T40 8 × 120 / 80 360308 120 80 20,0 T40 8 × 140 / 80 360309 140 80 20,0 T40 8 × 160 / 80 360310 160 80 20,0 T40 8 × 180 / 80 360311 180 80 20,0 T40 8 × 200 / 80 360312 200 80 20,0 T40 8 × 220 / 80 360313 220 80 20,0 T40 8 × 240 / 80 360314 240 80 20,0 T40 8 × 260 / 80 360315 260 80 20,0 T40 8 × 280 / 80 360316 280 80 20,0 T40 8 × 50 360320 80 44 14 T40 4 × 30 405862 30 16 4,0 T20 4 × 34 405370 34 16 4,0 T20 CONNECTING FITTINGS screws for exterior • designed especially for wooden constructions, anchoring, connecting, etc. • fillister head – elegant appearance, designed especially for pillars fastening • 4CUT point – no pre-drilling needed (most materials1]) • unique tip profile together with a corrugated thread speed up screwing and reduce the force required for screwing • much lower risk of material cracking at the edge • all that means faster and better work, longer battery life and lower bit wear • made of stainless steel A1 for outdoor use • suitable for wooden constructions, pergolas, fastening of objects, etc. • washer head – large bearing surface for transmission of great force • 4CUT point – no pre-drilling needed (most materials1]) • unique point profile with a square cross section together with a corrugated thread speed up screwing and reduce the force required for screwing • from the length of 160 mm the milling section Spax 4CUT – noticeably reduces torque during tightening • much lower risk of material cracking at the edge • all that means faster and better work, longer battery life and lower bit wear • Wirox coating has 20 times higher corrosion resistance compared to conventional screws • perfectly fitting bits 1] some materials may require pre-drilling, we recommend testing it 1] some materials may require pre-drilling, we recommend testing it Post screw Frame screws with washer head corrugated thread square cross section washer head Screws with flat head • decorative screw with flat head • for connecting two boards • head height only 1 mm and diameter 10 mm • nickel surface treatment size (d1) (mm) code total length (Ls) (mm) thread length (LgV) (mm) outer diameter of the head (dk) (mm) bit size (d1) (mm) code total length (Ls) (mm) thread length (LgV) (mm) outer diameter of the head (dk) (mm) bit size (d1) (mm) code total length (Ls) (mm) thread length (LgV) (mm) outer diameter of the head (dk) (mm) bit
RkJQdWJsaXNoZXIy MzEyMDA=