10.9 www.demos‑trade.com B 1 2 3 A Ls LgV Ød1 Ødk 75° 372150 40 28 6 T15 372152 45 30 6 T15 372153 50 35 6 T15 372154 40 28 7 T20 372155 45 30 7 T20 360297 50 35 7 T20 360298 60 40 7 T20 372156 45 30 8 T20 362693 50 35 8 T20 CONNECTING FITTINGS screws for interior • 4CUT point – no pre-drilling needed (most materials1] ) • unique point profile with a square cross section together with a corrugated thread speed up screwing and reduce the force required for screwing • much lower risk of material cracking at the edge • all that means faster and better work, longer battery life and lower bit wear • Multi head ensures milling into board materials with minimal damage to the surroundings, reduces the possibility of spinning the screw when attaching metal objects • Wirox coating has 20 times higher corrosion resistance compared to conventional screws • perfectly fitting bits 1] partial thread is particularly suitable for two boards clamping Special features: improved Pozidrive or Torx white zinc surface treatment (WIROX) – higher corrosion resistance, no harmful chrome Advantages: sharp point and square cross section for easy and fast drilling-in corrugated thread – light run due thread directing grooves under the head – they mill the head into the material with minimal damage to the surroundings, they significantly reduce the possibility of spinning the screw when attaching metal objects corrugated thread square cross section the multi head does not spin perfectly fitting bits For universal use • particularly suitable for MDF boards • no pre-drilling1] , reducing the risk of material splitting and bulging • CUT point with a corrugated thread for easy drilling-in • special narrow head with 75° angle with groove for clean countersinking • partial thread for tightening the upper part • Wirox surface treatment has 20 times higher corrosion resistance compared to conventional screws • the above mentioned advantages combined with T-Star plus drive • we recommend the use of genuine T-STAR plus bits for perfect performance • shoulder ensures better centring and transmission of force, prevents slipping at lateral pressure • working with conventional Torx bits will not allow you to take full advantage of the improved drive • also used as a substitution for the confirmat screw • size 4.5 × 50 is ideal for connecting LTD Spax M 1] some materials may require pre-drilling, we recommend testing it size (d1) (mm) code total length (Ls) (mm) thread length (LgV) (mm) outer diameter of the head (dk) (mm) bit 3,5 × 40/28 partial thread 3,5 × 45/30 partial thread 3,5 × 50/35 partial thread 4,0 × 40/28 partial thread 4,0 × 45/30 partial thread 4,0 × 50/35 partial thread 4,0 × 60/40 partial thread 4,5 × 45/30 partial thread 4,5 × 50/35 partial thread A B 1 2 3
RkJQdWJsaXNoZXIy MzEyMDA=