07.149 www.demos‑trade.com Art. 0198 Art. 0197 Art. 0185 Art. 0189 Art. 0164 Art. 0187 Art. 0229 Art. 0106 Art. 0251 Art. 0198 Art. 0197 Art. 0190 Art. 0189 Art. 0164 Art. 0187 Art. 0106 Art. 0251 Art. 0229 Art. 0185 0198 0164 min. 20 min. 465 Art. 0187 Art. 0164 = = = = Art. 0251 Art. 0106 Art. 0195 Art. 0138 27 28-40 12 9 32 27 20 7 X H = X - 60,5 29,5 Art. 0189 32 26 9 40 12 H = X - 44,5 29,5 min. 3 8 34 X 20 7 = = = = Art. 189 Art. 195 Art. 0137 Art. 0251 Art. 0106 Silent Silent Filo 229352 403795 403796 229351 403798 403799 229140 229333 229334 229335 229337 229339 229345 229349 87447 87417 FITTINGS FOR SLIDING AND FOLDING DOORS, WARDROBE EQUIPMENT SILENT – fittings for interior doors – 100 kg • fittings for medium-heavy sliding doors • special design of runners components for particularly quiet operation • when mounted on the wall, max. leaf thickness 40 mm • FILO – version with milled handles, the gap between the top guide and the door leaf is only 8 mm • the set must be completed with top guide • the activator of the soft closer function must be ordered together with each soft closer, it must be inserted into the guide • when installing one soft closer, min. leaf width 465 mm • when installing 2 soft closer, min. leaf width 680 mm • we recommend using the widest leaves possible • narrow and tall leaves are less stable and especially in connection with a soft closer may cause bouncing and malfunction top guide 28−40 mm ball bearings load 80/100 kg • recommended pitch: every 30 cm Complete sets of fittings for 1 leaf Optional accessories Top guide SILENT FILO SILENT without soft closing 40 kg with soft closing 80 kg with soft closing without soft closing 40 kg with soft closing 80 kg with soft closing code description 1.5 m ART. 0195 2 m ART. 0195 3 m ART. 0195 6 m ART. 0195 code description soft closing for leaf up to 40 kg soft closing for leaf from 40 to 80 kg soft closer activator code description top guide fastener Art. 0189 code description bottom profile for milling-in ART.0251 2 m bottom profile for milling-in ART.0251 4 m
RkJQdWJsaXNoZXIy MzEyMDA=