07.145 www.demos‑trade.com Fix 1 2 3 29 -32 15,5 11-14 25-50 fix 37-60 L L P P L fix fix fix D P > 75 mm 400 < L < 1350 mm L = (2 x P) + D 3 L 355892 FITTINGS FOR SLIDING AND FOLDING DOORS, WARDROBE EQUIPMENT StrongLine Synchrotec smooth opening set top guide 25–50 mm positioning of bottom elements fix – fixed leaf bottom view D – hole width L – leaf width P – leaf overlap Assembly manual: 1. fasten the fittings on the particular leaves, 2. install a fixed leaf, 3. install a middle leaf, 4. thread the cable through the fastening element, Fig. 1, 5. pull the cable around the pulleys so that the free ends are at the fixed leaf and the fastening element 2 is on the third leaf, 6. thread the loose ends of the cable through the fastening element, Fig. 2 (on the fixed leaf), and fasten slightly, 7. install the third leaf, attach the fastening element to it, Fig. 3, 8. adjust and tighten, cut off the remaining part of the cable, 9. tighten the cable using an adjustment screw on the middle leaf, loosen the cable on the fastening element in order to adjust the mutual position of the leaves, 10. on the third leaf, it is possible to install soft closer in the outer positions, the remaining sets must be without soft closing. ball bearings load 80 kg • by pulling the outer leaf, the middle leaf moves smoothly • it is possible to install with any set meeting the following conditions: – distance between the leaf and guide 29–32 mm – distance between leaves 37–60 mm (axes of particular leaves) • guide profiles and fitting sets are not included in the system, must be purchased separately Fittings for smooth gradual opening of door leaves code description complete set
RkJQdWJsaXNoZXIy MzEyMDA=