07.65 www.demos‑trade.com 5 6,3×32 4 7 6 3 7 Ø6,5 x 32 X1 X1 1 2 Ø3,5 x 25 18 4 S4V0 * * h = H - 45 18 20 18 20 Era Rekord Era h = H - 40 mm hp = h - 1 mm hl = hp - 4 mm d = (D - 3 mm + Z) : N dp = d - 37 mm dpL = d - 17 mm dl = dpL - 6 mm dk = d - 57 mm Rekord 2 3 5 Era 34 68 65 102 136 Rekord 30 60 57 90 120 Mini SV-25 (14–25 kg) 318662 Mini SV-40 (25–40 kg) 283956 Mini SV-60 (40–60 kg) 351743 318663 283955 FITTINGS FOR SLIDING AND FOLDING DOORS, WARDROBE EQUIPMENT H – inner hole height in mm W – inner hole width in mm N – number of leaves Z – overlap width in mm Calculation table: 1] handle profile height is the same as the door height 2] door height is reduced by an additional 5 mm when using soft closers • double-sided soft closer, for the middle leaf; it allows opening to both sides, stops the middle leaf in a central position from both sides • for leaf weights up to 25/40 kg • Attention! It requires a reduction in leaf height, the overall leaf height must be 44 mm lower than the hole height. • when using in the Single rail, gently grind the bottom edges of the trap so it touches the rail with its entire surface • detailed instructions for each of the soft closers can be downloaded from the portal, identified by a code Soft-closing systems • for leaf weights up to 25/40/60 kg • 3 heights of trap in the package, for fine adjustment • when using in the Single rail, gently grind the bottom edges of the trap so it touches the rail with its entire surface n Important When the door is closed for the first time, the soft closers are not activated. Close the leaf slowly to activate the soft closers (click). Rapid impact can damage the soft closer as the leaf strikes the end position without soft closing! Always demonstrate before handing the product to the customer in order to prevent possible complications. Mini SV Central SV Simple Blue system for built-in sliding cabinets – 18 mm thick panel three leaves overlap two leaves overlap handle profile1] door leaf height h2] panel height 18 mm hp panel height mirror/glass 4 mm hl leaves width door d panel width 18 mm dp panel width 12 mm dpL panel width mirror/glass 4 mm dl bottom angle bracket length dk handle profile number of leaves – N 4 (two leaves overlap) 4 (three leaves overlap) overlap width in mm – Z description code description code Central SV-25 (double-sided) up to 25 kg Central SV-40 (double-sided) up to 40 kg
RkJQdWJsaXNoZXIy MzEyMDA=