06.55 www.demos‑trade.com 30000 [h] 231401 ±3000 1000 60 231396 ±6500 1050 285094 134114 487570 285093 285094 134114 487570 LIGHTING AND ELECTRIFICATION OF FURNITURE StrongLumio S3 | 12 V LED strips, IP65 Ĺ recommended power supplies, see p. 06.57–06.58 Recommended power supplies Input power: 12 W/m IP65 • waterproof construction1] • if used in wet environments, spots that could come into contact with water must be insulated with silicone sealant • maximum length of continuous strip: 3 m • very strong lighting 1] this type of LED strip is not recommended for long-term lighting. We recommend short-term lighting because of poor heat dissipation. Lamino, glass, etc., do not provide sufficient heat dissipation. There is a risk of burning the diodes, damaging the protective coating. Recommended duration of continuous lighting max. 30 min. Damage by overheating is not subject to warranty. Tips for use: • short-term lighting of places with higher humidity Recommended connecting cables Distributor Type of diode: 2835 1] Do not place snap-on connectors near a hob, kettle or other source of steam and increased humidity. Connectors can oxidise. Snap-on connectors are only suitable in combination with profiles with sufficient space such as Fanto, Wide and Diagonal14. At the connection point, the light may be interrupted or changed – the LED strip does not touch the profile at the connection. At the connection point, the LED strip and the connector need to be glued to the aluminium profile. Ĺ for further joining connectors, see p. 06.61–06.62 50 mm / 3 diodes 8 mm code light colour temperature (K) luminous intensity (lm/m) number of diodes per 1 m warm white cold white code description Mini connector (soldering), 1.8 m direct connection to transformer (soldering), 2 m cable to All in One unit1] – Mini, 2 m code description Mini, 6 outlets (individually up to 72 W), total max. 84 W, 0.25 m
RkJQdWJsaXNoZXIy MzEyMDA=