01.16 12345 12345 01 350827 350834 387304 350837 387311 350840 350830 350831 350832 37 73,5 K D H 22 T 350830 D=K+10-H 350828 387307 350835 350838 387312 350841 350829 387310 350836 350839 350842 40 H K A 37 + T 73,5 T A=(6-K)+(H+2) FURNITURE HINGES StrongHinges S3 for clipping onto a plate Item in stock Item on demand code description with soft closing, for screw fixing without soft closing, for screw fixing with soft closing, with dowels with diameter of 10 mm unsprung1], for screw fixing with dowels with a diameter of 10 mm without soft closing, without cam, for screw fixing code description with H0 plate, for screw fixing with H0 plate with euro screws with H0 plate with cam, cup cover caps and arm1] • all sets come always with a pre-mounted plate on the hinge 1] the set includes: – 2 pcs of hinges with pre-mounted plates – 2 pcs of cup cover caps – 2 pcs of hinge arm cover caps – 8 pcs of screws 1] for handleless opening mechanisms see p. 01.23 - 01.24 • 110° opening angle • recommended H0 plates: screw with cam 315856, screw 92596, with euro screws 92597 Ĺ for other plates see p. 01.19 version with dowel Full overlay with cam Full overlay – sets • possible adjustment D ± 4 mm code description with soft closing, for screw fixing with soft closing, with dowels with diameter of 10 mm without soft closing, for screw fixing unsprung1] , for screw fixing with dowels with a diameter of 10 mm without soft closing, without cam, for screw fixing • recommended H0 plates: screw with cam 315856, screw 92596, with euro screws 92597 • 110° opening angle Ĺ for other plates see p. 01.19 Ĺ 1] for handleless opening mechanisms see p. 01.23 - 01.24 Half overlay with cam version with dowel code description with soft closing, for screw fixing with soft closing, with dowels with diameter of 10 mm without soft closing, for screw fixing unsprung1] , for screw fixing without soft closing, without cam, for screw fixing • recommended H2 plates: screw with cam 350868, screw 92598, with euro screws 92599 • 110° opening angle Ĺ for other plates see p. 01.19 Ĺ 1] for handleless opening mechanisms see p. 01.23 - 01.24 Inset with cam • possible adjustment A is ± 4 mm 01 02 03 04 05 06 08 10 11 12 09 07 17 16 15 14 13
RkJQdWJsaXNoZXIy MzEyMDA=