10.96 12345 12345 10 LIBRA H2 Part. no PAT. PENDING LIBRA is the innovative family of CABINET HANGERS and WALL PLATES especially conceived to satisfy all the customer's needs. The LIBRA hangers are to be installed behind the rear panel with the only small cover caps left visible inside the cabinet. LIBRA is a very resistant and reliable solution as the zinc-coated steel body is sensibly thicker, and therefore stronger. All the models within the LIBRA family feature an innovative ANTI-TURNOVER device which is covered by patent. LIBRA H2 is the universal cabinet hanger 3 dowels + rotary lever. Also featured in the LIBRA family are 5 types of wall plates and 1 types of wall bars made of very thick zinc-coated steel and hardened by punched impressions. Wall bars and wall plates feature oval holes which facilitate the correct positioning and give the possibility to carry out the horizontal adjustment. Placement of the holes for wall-fixation has been optimised to reduce the stress on the plates and on the plugs. LIBRA cabinet hangers allow to adjust the cabinet vertically and horizontally. The 2 movements are 100% INDEPENDENT of each other and therefore make the adjustments much easier and more efficient. The adjustment and the locking of the ANTI-TURNOVER bolt can be carried out from the inside of the cabinet by using a standard PZ2 screwdriver. Capacity Loading 75 Kilos per piece in accordance with the regulation DIN 68840 Steel, Zinc alloy and Engineering plastic according to related version. 63420020ZN Description Cabinet hanger Libra H2 4 holes Ø10 5 13 12 37 32 32 32 19,5 15 min. 40 42 DRILLING PLAN FOR CABINET HANGER FIXED UNDER THE CABINET TOP OTHER APPLICATIONS FOR CABINET HANGER NOT FIXED TO THE TOP recommended fixing screws Ø3,5x20 recommended fixing screws Ø3,5x20 recommended fixing screws Ø3,5x20 16-21 13 37 32 32 32 19,5 15 min. 49 24,5 Ø30 Drilling plan for Libra CC1 cover cap Drilling plan for Libra CC2 cover cap For wall plates and cover caps see the related pages. 2 1 2 3 2 1 2 3 1 2 3 4 × Ø10 37 32 32 32 5 15 min. 15 min. 13 19,5 ø30 49 24 15 min. 19,5 13 12 54,5 42,5 34 40 2 134959 134963 160564 227087 Item in stock Item on demand CONNECTING FITTINGS adjustable cabinet hangers for top cabinets • right-hand adjustable cabinet hangers • secured with eccentric clamp and screws • locking bolt against unhinging of the cabinet from hanging profile in accordance with the standard EN14749 • load capacity 150 kg/pair • the back should be inserted 16 mm from the rear edge of the cabinet body • height adjustment 13 mm, depth adjustment 12 mm • for cabinet body depth up to 350 mm (top cabinets) • for drilling 30 mm 1 – height adjustment 2 – adjustment of offset from the wall 3 – safety latch against springing up Drilling holes for adjustment Installation of the cabinet hangers recommended fastening screws ø 3.5 × 20 Libra H2 cabinet hangers with locking Ĺ recommended wall bar 352537, or wall plates 134964 or 134965 Cover caps code description right-hand code type colour wide white grey narrow nickel 01 02 03 04 05 06 08 10 11 12 09 07 17 16 15 14 13
RkJQdWJsaXNoZXIy MzEyMDA=