10.95 www.demos‑trade.com min. 15 2 1 2 3 min. 15 2 1 2 3 min. 15 LIBRA H1 PAT. PENDING LIBRA is the innovative family of CABINET HANGERS and WALL PLATES especially conceived to satisfy all the customer's needs. The LIBRA hangers are to be installed behind the rear panel with the only small cover caps left visible inside the cabinet. LIBRA is a very resistant and reliable solution as the zinc-coated steel body is sensibly thicker, and therefore stronger. All the models within the LIBRA family feature an innovative ANTI-TURNOVER device which is covered by patent. LIBRA H1 is the universal screw fixing cabinet hanger. Also featured in the LIBRA family are 5 types of wall plates and 1 types of wall bars made of very thick zinc-coated steel and hardened by punched impressions. Wall bars and wall plates feature oval holes which facilitate the correct positioning and give the possibility to carry out the horizontal adjustment. Placement of the holes for wall-fixation has been optimised to reduce the stress on the plates and on the plugs. LIBRA cabinet hangers allow to adjust the cabinet vertically and horizontally. The 2 movements are 100% INDEPENDENT of each other and therefore make the adjustments much easier and more efficient. The adjustment and the locking of the ANTI-TURNOVER bolt can be carried out from the inside of the cabinet by using a standard PZ2 screwdriver. Capacity Loading 75 Kilos per piece in accordance with the regulation DIN 68840 Steel, Zinc alloy and Engineering plastic according to related version. Part. no 63420010ZN Description Cabinet hanger Libra H1 For wall plates and cover caps see the related pages. 12 18,5 15 min. 31 42 DRILLING PLAN FOR CABINET HANGER FIXED UNDER THE CABINET TOP OTHER APPLICATIONS FOR CABINET HANGER NOT FIXED TO THE TOP recommended fixing screws Ø3,5x20 recommended fixing screws Ø3,5x20 recommended fixing screws Ø3,5x20 16-21 Drilling plan for Libra CC1 cover cap Drilling plan for Libra CC2 cover cap 40 24,5 Ø30 18,5 15 min. min. 15 12 18,5 15 min. 54,5 42,5 25 31 2 1 2 3 min. 15 361269 CONNECTING FITTINGS adjustable cabinet hangers for top cabinets • right-hand adjustable cabinet hangers • secured with eccentric clamp and screws • locking bolt against unhinging of the cabinet from hanging profile in accordance with the standard EN14749 • load capacity 130 kg/pair • height adjustment 13 mm; depth adjustment 12 mm; lateral adjustment approx. 30 mm (by sliding on the wall plate) • for cabinet body depth up to 350 mm (top cabinets) • for wall mounted installation, the 352537 wall bar can also be used The set includes: – pair of cabinet hangers and cover caps – assembly template – wall plate – screws into the cabinet body 1 – height adjustment 2 – adjustment of offset from the wall 3 – safety latch against unhinging drilling the holes for adjustment Installation of the cabinet hangers recommended fastening screws ø 3.5 × 20 Libra H1 cabinet hangers with locking code description set for one cabinet (including template)
RkJQdWJsaXNoZXIy MzEyMDA=